3502 Mounting Question

[MICHAEL BURNS]

I am going to be installing around 120 3502i AP's in a couple weeks and wonder if anyone has come up with a solution for hanging them from wire trays.  The office we are installing them in has decided to go with an "industrial" look and the only place I can see to hang the AP's is from the wire tray.

Any suggestions?

[George Stefanick]

Normally a survey will depict where the ap goes. If you are limited to only installing aps to a wire tray, you may need a custom solution, lowes or home depot run. Plastic ties, perhaps a 1x1 board then mount the ap to the board and then mount the board to the wire.

There are ceiling tile mounts, above t bar kits, etc ...

Sent from Cisco Technical Support iPhone App

[Scott Fella]

I've had client do the same and it was zip ties on the bracket and ap on the bracket with another zip tie to secure the ap on the bracket.

Sent from Cisco Technical Support iPhone App