3502E as Autonomous Web GUI problem

[omnibus]

Hi Everyone,

I have an AIR-CAP3502E-A-K9 with the autonomous (AP3G1-K9W7-M), Version 15.3(3)JF12, RELEASE SOFTWARE (fc1)

All the CLI works as expected but the Web GUI give me a "404 not found error" anytime I press the Apply button to push a new configuration.

Anyone of you are experiencing the same problem or get it sorted in some way?

[Rasika Nayanajith]

If the AP model got the latest image I would try with that code. If not I would stick with CLI for configuration.

Since it is autonomous codes, there is no development to fix defects (if this is one of them).

HTH

Rasika

*** Pls rate all useful responses **

[omnibus]

The software is supported and still developed by Cisco up to 2021. I don't know who invented the story about autonomous software is not developed and maintained. I have both the latest released in May and February and both having the same problem.

[Rich R]

Actually @omnibus Cisco announce it themselves very clearly: https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-3500-series/eos-eol-notice-c51-734304.html - nobody is 'inventing' anything - it's simple FACT!
End of SW Maintenance Releases Date: HW The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. March 31, 2017 <<<<<<<
They sometimes produce fixes for things like critical security vulnerabilities after that date at their own discretion (and you might get lucky and pick up a bug fix or 2 at the same time) but if you report a bug now it will NOT get fixed.

[patoberli]

This is an issue that others also had. It looks like a browser compatibility issue. One solution others posted, was to go back one or two releases for this AP model.
You could try it in Edge in Internet Explorer compatibility mode (press F12).