04-15-2020 10:46 AM - edited 07-05-2021 11:56 AM
We have a pair of 5520's in DC1 in HA SSO and licensed for 500 APs. We want to establish fail over to DC-2 for the 500 AP's. Can we purchase a 2nd 5520 with no licenses for an N+1 fail over or do we need 500 licenses on the N+1 5520 controller? Taking it one step further, can we purchase a pair of 5520's for DC-2 and configure then for HA SSO and no licensing? Basically N+1 to a HA SSO pair that is unlicensed.
04-15-2020 01:46 PM
Since 3504/5520/8540 supports RTU licensing, so you should be able to do that technically. This page clarifies most of licensing queries on those models.
HTH
Rasika
*** Pls rate all useful responses ***
04-15-2020 11:17 PM
Hi,
There are two diff cases:
1. If you want to use HA AP/Client SSO then you dont need license on both WLCs. (In this you need direct connctivity between WLCs or you can extend using layer 2 VLAN)
2. If you want to Implement HA N+1 then you need 500 licenses on each WLC.
how toi implement HA N+1:
https://rscciew.wordpress.com/2014/06/07/n1-high-availability-configuration-on-cisco-2504wlc/
How to implemnet HA AP/Client SSO:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html
Regards
Dont forget to rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide