5760 controller license

[syed baseeruddin]

Hi

The Controller AIR CT5760-100-K9 by default it support 100 licenses

if i need more licences for exmaple if need 9 licences

if i upload the licences of 9 APS

After  uploading  licenses file then we cannot the controller mgmt ip add 

 please kindly advice for licenses

[Prabath Godevithanage · Accepted solution]

Is it just a single controller or a HA setup? What do you see in the console

[syed baseeruddin]

Thanks Preranda

in our one project we are having one controller 5760 .

my question is as far i know AIR-CT5760-100-K9 support by default 100AP Base License

in our project they are 109 APS

1.AIR-CAP702I-E-K9 qty is 77

2.AIR-CAP1602-E-K qty is 32

my question once we upload 9 licences in the controller.we cannot change the mgmt ip add of the controller please correct me if am wrong 

The details of licences as shown  below

	1	AIR-CT5760-100-K9	Cisco 5700 Series Wireless Controller for up to 100 APs	1
	2	LIC-CT5760-100	100 AP Base license	1
	3	L-LIC-CTIOS-1A	AP adder license for IOS based Wireless LAN Controllers	9

[Prabath Godevithanage]

As far as I know ap adder licenses for 5760 are RTU licenses and wont be locked to any node.So I dont think you would have a problem changing the management ip

[syed baseeruddin]

Thanks preranda,

could you please provide any document of RTU licenses which wont be locked to any node.

[Prabath Godevithanage · Accepted solution]

Hi Sayed, here is one but you'll find few around

[syed baseeruddin]

Thanks preranda,

Regarding problem of changing mgmt ip add after uploading the additional licence file.

i refer the document which u sent the link https://supportforums.cisco.com/document/12068056/ngwc-how-activate-ap-count-licenses-and-deactivate-evaluation-license-cisco-5760

Other wireless controller platforms such as the Cisco 5508 Wireless Controller, Cisco Wireless Services Module 2 (WiSM2), and Cisco 2500 Series Wireless Controller will continue to use the node-locked licensing model, in which the access point count licenses are tied to the hardware.

The New WLC controller 5760 we can the mgmt ip add but like wisim2,2500,5508 we cannot change the mgmt ip add after uploading the licence file

please correct me if am wrong