01-28-2015 03:16 AM - edited 07-05-2021 02:21 AM
We have a site with a 5760 controller installed and we are trying to utilize a 5508 setup as an anchor controller at a remote sire for guest access. The mobility peer is setup on both ends and is up. The WLAN insterface is setup on both ends. On the anchor the WLAN is defined and as long as we do NOT setup security/Layer3 everything works fine. Clients on the Foreign side connect to WLAN and get ip address and are access the internet. As soon as we setup L3 Security as Web Policy, Passthough, Over-ride Global Config, Web Auth type customized Guest access is broken. We see clients try to gt on Guest but it appear that they never get an ip address in the setup above. IF we go back and set L3 Security to none evrything goes back to working normally.
Are there any suggestions as to where the applicatlication of L3 securtiy on the anchor is breaking things.
Solved! Go to Solution.
01-28-2015 03:55 AM
Are you setting the layer 3 in both the foreign and the anchor? They should both match in order for it to work.
-Scott
01-28-2015 05:46 AM
01-28-2015 03:55 AM
Are you setting the layer 3 in both the foreign and the anchor? They should both match in order for it to work.
-Scott
01-28-2015 05:35 AM
I did set the L3 on the foregin and it at least did not break things. I think it might have done the trick but I have to get a user at the site who can tell me if the splash screen is working or not.
Thanks for the timely response.
01-28-2015 05:41 AM
have you tried making internal webauth work first?
01-28-2015 05:46 AM
04-17-2015 05:33 AM
Thank you Viten. Here is the cisco.com link for the same pdf file posted by Surendra:
http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/117742-configure-wlc-00.html
Regards,
Vinay Sharma
01-28-2015 06:00 AM
When anchoring, the WLAN's need to be configured the same in the foreign and anchor. Just keep that handy. If not, it will break:)
-Scott
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide