cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
976
Views
0
Helpful
5
Replies

5760 Webauth Cert "How-To"

Libera Networks
Beginner
Beginner

Does anybody knows how to do this.

On 5508, certificates for the virtual ip can be configured and virtual ip can be binded to the url of the certificate imported on the wlc., but i a cannot find any guide to do this on a 5760

1 Accepted Solution

Accepted Solutions

Hi

See whether below helps on this

5760(config-params-parameter-map)#virtual-ip ipv4 1.1.1.1 virtual-host ?
  WORD  Specify name of the virtual host

 

What version of IOS XE are you running ? 3.6E is the latest.

HTH

Rasika

****Pls rate all useful responses ****

 

View solution in original post

5 Replies 5

Moin Ilyas
Enthusiast
Enthusiast

Please refer: http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan-controllers/117728-configure-wlc-00.html#anc9

Hope that helps.

Thanks for your answers, but i already did both things. Wahta i wanto to to is to vinculate the dns resolution of the certificate with vIP. I attached an image from the GUI menu to do this on 5508, i cannot do this on 5760.

Hi

See whether below helps on this

5760(config-params-parameter-map)#virtual-ip ipv4 1.1.1.1 virtual-host ?
  WORD  Specify name of the virtual host

 

What version of IOS XE are you running ? 3.6E is the latest.

HTH

Rasika

****Pls rate all useful responses ****

 

Great, that's it.

 

Thanks a lot

Hi 

You configure virtual IP under "global parameter map" on your 5760. When you get the CSR, you have to use the FQDN of this virtual IP address.

eg

parameter-map type webauth global
 type webauth
 virtual-ip ipv4 1.1.1.1
!

Here is how do you install a WebAuth cert on 5760

http://mrncciew.com/2014/07/30/5760-webauth-certificates/

 

HTH

Rasika

**** Pls rate all useful responses ****

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: