802.11b Network Management

[vibez1]

I need to scan the air for accessible Wi-Fi APs and find connection properties [like BSSIDs, Link Speed, SNR, BW etc] between my PDA [350 series adapter] and each AP. My dev specs are NDIS 4.0 on Windows CE. Wanted to know if Cisco had any specific driver support/OIDs from which I could get/set such information.

Thx,

Vibes

[#2]

You can get the OID for the signal strength in the following location:

ftp://ftp.cisco.com/pub/mibs/v1/