9100 Series

[Mayhhem]

Hello,

Does Meraki Dashboard migration support the 9100 Series (9120AXI-E and 9115AXI-E)?

[Raphael_L · Accepted solution]

Hi ,

Yes according to this document : https://documentation.meraki.com/Cloud_Monitoring_for_Catalyst/Getting_Started/Cloud_Monitoring_for_Catalyst_Wireless_FAQ

Wi-Fi 6:

• Cisco Catalyst 9130 Series

• Cisco Catalyst 9124 Series

• Cisco Catalyst 9120 Series

• Cisco Catalyst 9117 Series

• Cisco Catalyst 9115 Series

• Cisco Catalyst 9105 Series

Only in monitoring mode.

[Mayhhem]

Thank you for your quick reply 🙂

[Rasmus Hoffmann Birkelund]

Do note that the Dashboard only supports these APs in cloud monitoring as @Raphletourn mentions. So you’ll still need a 9800 controller. You can not add these APs as any other Meraki AP and manage it from the Dashboard.

[Thomas Obbekaer Thomsen]

You write "migration" ... do you mean converting these APs to be running on the dashboard without a local WLC ?

Then no, that is only for the CW916x APs (where you can actually start the migration on the 9800 WLC).

For monitoring the 9800 WLC with the C9100 APs on the dashboard yes, that is supported as mentioned by others.