9115 supporting CleanAir or not?

[i_mohamed]

Hello,

Does Cisco 9115 support CleanAir or not?

[M02@rt37]

[Edited]

Hello @i_mohamed 

No, c9115 Series Access Points do not support CleanAir technology.

On 9100 access points series with the RF ASIC, the access point can perform advanced RF spectrum analysis and delivers features such as Cisco CleanAir.

[Karsten Iwen]

The 9115 doesn’t have the Cisco RF ASIC. From the Wi-Fi 6 APs, the 9120 and 9130 has.

[ammahend]

it dose not support clearair, although it does support spectrum intelligence, which is not cleanair but a much more toned down version of what cleanair can do for interference avoidance, more details here

[M02@rt37 · Accepted solution]

@ammahend 

it dose not support clearair, although it does support spectrum intelligence, which is not cleanair but a much more toned down version of what cleanair can do for interference avoidance, more details here

Thanks a lot for that clarification !

[ammahend]

you are welcome

[Leo Laohoo]

Frankly, I would not be investing in the 911x, 912x or 9130 because EoS announcement is imminent.  

The replacement for the "first gen" will be the 913x.

[Scott Fella · Accepted solution]

You can find this info by doing some searching or looking at the data sheet.  Here is a matrix that you can reference for that feature and many others.

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/feature-matrix/ap-feature-matrix.html#_Toc118737959