9800-CL 17.6.5 mesh SNR stats via SNMP or Netconf/YANG

tjswenet · ‎04-17-2023

Hi!

Trying to do some external logging of mesh SNR/dB numbers for AP:s that move around on our site in a mesh-network.

I can fetch a lot of stats via SNMP but for example this clMeshNeighborLinkSnr .1.3.6.1.4.1.9.9.616.1.3.1.1.3 in CISCO-LWAPP-MESH-MIB is not available when i walk it. Browsed and walked plenty of MIB:s but cant find anything.

Same thing with /mesh-oper-data/mesh-neigh/mesh-neighs/link-snr via Netconf/Yang using gnmic or Yang Suite.

Am i doing something wrong or is this not available? I know the data is there somewhere because Prime is logging it.

AP:s are C9124AXD-E and AIR-AP2802E-E-K9

Rich R · ‎04-18-2023

Try opening a TAC case and asking them the question?

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390