9800 wlc, redirect messages to external syslog server

[LenarFA]

Hi,

is't possible to redirect mesages from "sh logging profile wireless" to external syslog server?

[Mark Elsen]

 - Try https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/enabling-syslog-messages-in-access-points-and-controller-for-syslog-server.html#task_56DB7D3369B846FA98D2D071AAC9D946 , and set the logging facility to notifications.

 M.

[LenarFA]

Maybe I didn't describe the question correctly.
What you are suggesting is a normal redirect to external server IOSd syslog messages from the 9800 WLC and AP. I want to redirect to an external server ALL client join messages from WNCd, not only RUN state message (WNCd redirect this message to IOSd). Please see the picture below.

[LenarFA]

What I want to achieve is logging on an external server info about Client Association Trap and Client Authenticated Trap via syslog. On previous WLC 5520 it's configured by:

config logging syslog facility client authentication enable
config logging syslog facility client associate enable