02-06-2012 09:42 PM - edited 07-03-2021 09:31 PM
In my Wireless environment, WLC 2125 is connected to a LWAP 1042n. The WLC is succesfully providing DHCP IP to the AP but is unable to discover it. All are connected. During debug mode following error message is encountered in WLC 2125, "AAA Authorization Fail....".
Please suggest what to do.
Solved! Go to Solution.
02-07-2012 04:06 AM
Make sure you don't have authenticate ap via aaa enabled on the wlc. Look under the Security tab in the wlc.
Thanks,
Scott Fella
Sent from my iPhone
02-07-2012 04:06 AM
Make sure you don't have authenticate ap via aaa enabled on the wlc. Look under the Security tab in the wlc.
Thanks,
Scott Fella
Sent from my iPhone
02-07-2012 04:37 AM
Here is a good doc that explains different errors:
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide