02-04-2020 07:24 AM - edited 07-05-2021 11:38 AM
Hello
i have a acces point Product/Model Number : AIR-LAP1131G-E-K9 with version Version 12.3(8)JEA
and controller wireless virtuel avec ios 8.9.100
so i want to know what is version image ios in acces point 1131 to work with this image controller virtual 8.9.100
thanks in advance
//////////////////////////////////////////////////////////////////////////////
show version
Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.3(11)JA4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 17-Jul-07 19:04 by hqluong
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
ap uptime is 3 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-k9w7-mx.123-11.JA4/c1130-k9w7-mx.123-11.JA4"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
--More--
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco AIR-LAP1131G-E-K9 (PowerPCElvis) processor (revision D0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1424Q10M
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
1 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 54:75:D0:B8:0D:BA
Part Number : 73-11587-02
PCA Assembly Number : 800-30422-01
PCA Revision Number : B0
PCB Serial Number : FOC14224L86
Top Assembly Part Number : 800-29582-02
Top Assembly Serial Number : FCZ1424Q10M
--More-- Top Revision Number : A0
Product/Model Number : AIR-LAP1131G-E-K9
Configuration register is 0xF
ap#sho
ap#show ip inter
ap#show ip interface br
ap#show ip interface brief
Interface IP-Address OK? Method Status Protocol
BVI1 192.168.0.22 YES DHCP up up
Dot11Radio0 unassigned YES NVRAM up up
FastEthernet0 unassigned YES NVRAM up up
ap#sho
ap#show run
ap#show running-config
Building configuration...
Current configuration : 1426 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
enable secret 5 $1$BUK9$q5q4xhmrA6Y1ZTAsRaacu0
!
ip subnet-zero
!
!
no aaa new-model
!
dot11 ssid SOTETEL
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 0812435A0C0D001B405B5D5D
--More-- !
dot11 ssid TT-WIFI
authentication open
guest-mode
!
power inline negotiation prestandard source
!
!
username Cisco password 7 14341B180F0B
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption mode ciphers aes-ccm
!
ssid SOTETEL
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
--More-- channel 2422
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address dhcp client-id FastEthernet0
no ip route-cache
!
ip http server
--More-- no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
control-plane
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
!
end
ap#
ap#
/////////////////////////////////////////////////////////////////////
and i send screen shot for acces point
Solved! Go to Solution.
02-04-2020 07:30 AM
- I think this ap-model is no longer compatible with 8.9 google on 'cisco wireless compatibility matrix' to get the compatibility-info's for various ap-models, controllers and software releases.
M.
02-04-2020 08:01 AM - edited 02-04-2020 11:51 PM
1131 AP last Supported version is 8.0.X so you should run 8.0.X On wlc to join it.
02-04-2020 08:05 AM
It's no possible, the last version that support models 1130 is 8.0.152.0 and you AP needs 153-3.JA12
15.3(3)JAA12 12.4(25e)JAP12. Please check the wireless compatibility Matrix.
https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
spero que la información haya sido útil y si no tienes más preguntas recuerda cerrar el topic, seleccionando la respuesta como "Respuesta correcta"
**Please rate the answer if this information was useful***
**Por favor si la información fue util marca esta respuesta como correcta**
*Tu reconocimiento nos alienta a seguir participando en los foros *
02-04-2020 01:11 PM
02-04-2020 11:28 PM
There are only two ways to make it work.
1. Either conver 1131 AP to Autonomus AP
2. Or Donwgrade vWLC to 8.0.152.0 version then 1131 will join to vWLC.
Regards
Dont forget to rate helpful posts
02-04-2020 11:55 PM - edited 02-04-2020 11:55 PM
Here is the link for 1130AG:
https://software.cisco.com/download/home/279537722/type/280775090/release/12.4.25e-JAP12
Regards
Dont forget to rate helpful posts
02-05-2020 12:26 AM - edited 02-05-2020 12:30 AM
yes.
Intstall Autonomous image to make it as standalone AP: https://software.cisco.com/download/home/279537722/type/284180979/release/12.4.25d-JA1
or
downgrade vWLC to 8.0.152.0 version
02-04-2020 07:30 AM
- I think this ap-model is no longer compatible with 8.9 google on 'cisco wireless compatibility matrix' to get the compatibility-info's for various ap-models, controllers and software releases.
M.
02-04-2020 08:01 AM - edited 02-04-2020 11:51 PM
1131 AP last Supported version is 8.0.X so you should run 8.0.X On wlc to join it.
02-04-2020 08:05 AM
It's no possible, the last version that support models 1130 is 8.0.152.0 and you AP needs 153-3.JA12
15.3(3)JAA12 12.4(25e)JAP12. Please check the wireless compatibility Matrix.
https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
spero que la información haya sido útil y si no tienes más preguntas recuerda cerrar el topic, seleccionando la respuesta como "Respuesta correcta"
**Please rate the answer if this information was useful***
**Por favor si la información fue util marca esta respuesta como correcta**
*Tu reconocimiento nos alienta a seguir participando en los foros *
02-04-2020 01:11 PM
02-04-2020 11:00 PM
Hello
i can possiblity convert ios Acces point 1131 : to other image ios that controller can join this acces point without change image ios controller virtual ???
thanks in advance
Product/Model Number: | AIR-LAP1131G-E-K9 |
Top Assembly Serial Number: | FCZ1424Q10M |
System Software Filename: | c1130-k9w7-tar.123-11.JA4 |
System Software Version: | 12.3(11)JA4 |
Bootloader Version: | 12.3(8)JEA |
System Uptime: | 11 minutes |
02-04-2020 11:13 PM
02-04-2020 11:21 PM
I means Access Point IOS Release for this acces point :
For TO ===========> other Access Point IOS Release without change IOS relase controller 8.9.100 ??
it is possible or NOT ???????
Product/Model Number: | AIR-LAP1131G-E-K9 |
Top Assembly Serial Number: | FCZ1424Q10M |
System Software Filename: | c1130-k9w7-tar.123-11.JA4 |
System Software Version: | 12.3(11)JA4 |
Bootloader Version: | 12.3(8)JEA
|
02-04-2020 11:28 PM
There are only two ways to make it work.
1. Either conver 1131 AP to Autonomus AP
2. Or Donwgrade vWLC to 8.0.152.0 version then 1131 will join to vWLC.
Regards
Dont forget to rate helpful posts
02-04-2020 11:42 PM
thanks
Sandeep can you send me the link to download image ios release from Site Cisco 153-3.JA12 /// 15.3(3)JAA12 /// 12.4(25e)JAP12
May be when i can try for this IOS , the Vcontroller can join this acces point
thanks in advance
02-04-2020 11:55 PM - edited 02-04-2020 11:55 PM
Here is the link for 1130AG:
https://software.cisco.com/download/home/279537722/type/280775090/release/12.4.25e-JAP12
Regards
Dont forget to rate helpful posts
02-05-2020 12:03 AM
Hello
Sanddep you say :
There are only two ways to make it work.
1. Either conver 1131 AP to Autonomus AP
2. Or Donwgrade vWLC to 8.0.152.0 version then 1131 will join to vWLC.
SO the final solution is :===>
1) conver 1131 AP to Autonomus AP :=========> how i can do that ???, with this IOS Realse https://software.cisco.com/download/home/279537722/type/284180979/release/12.4.25d-JA1 !!!!
2) Or Donwgrade vWLC to 8.0.152.0 version then 1131 will join to vWLC.
i wait to reply me
thanks in advance
02-05-2020 12:26 AM - edited 02-05-2020 12:30 AM
yes.
Intstall Autonomous image to make it as standalone AP: https://software.cisco.com/download/home/279537722/type/284180979/release/12.4.25d-JA1
or
downgrade vWLC to 8.0.152.0 version
02-04-2020 11:38 PM
- Not ,
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide