cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5928
Views
5
Helpful
6
Replies

Access Point IOS

yusufbudi
Level 1
Level 1

Hi team

whar are the difference between SWAP1600-RCOVRY-K9 and SWLAP1600-MESH-K9 ios for AIR-CAP XXX

Thanks

6 Replies 6

Scott Fella
Hall of Fame
Hall of Fame

Rcv is the normal recovery image. The mesh image is if you want to do mesh, but you can always run mesh when the ap joins the WLC. The rcv is what you want.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Hi Scott Fella,

I used AP 1602I-E and 2602E-E, with wireless controller 5508 (100 license).

Should I using software "SWLAP1600-MESH-K9" or "SWAP1600-RCOVRY-K9" to compatible with WLC 5508?

And what is different between both ?

Thanks so much

Should I using software "SWLAP1600-MESH-K9" or "SWAP1600-RCOVRY-K9" to compatible with WLC 5508?

Use "SWAP1600-RCOVRY-K9".

i have this problem too please help to answer on this soon, thank.

 

i have this problem too please help to answer on this soon, thank.

You need to tell us what the problem is.  We can't read your mind.

Abhishek Abhishek
Cisco Employee
Cisco Employee

SWAP1600-RCOVRY-K9  IOS Wireless LAN Recovery-should be used for Controller based deployment

AND

SWLAP1600-MESH-K9  Enterprise Wireless Mesh - AP1600I Controller-based SW Image-used for Wireless MESH deployments only

Review Cisco Networking for a $25 gift card