Access Point IOS

[yusufbudi]

Hi team

whar are the difference between SWAP1600-RCOVRY-K9 and SWLAP1600-MESH-K9 ios for AIR-CAP XXX

Thanks

[Scott Fella]

Rcv is the normal recovery image. The mesh image is if you want to do mesh, but you can always run mesh when the ap joins the WLC. The rcv is what you want.

Sent from Cisco Technical Support iPhone App

[huu hieu]

Hi Scott Fella,

I used AP 1602I-E and 2602E-E, with wireless controller 5508 (100 license).

Should I using software "SWLAP1600-MESH-K9" or "SWAP1600-RCOVRY-K9" to compatible with WLC 5508?

And what is different between both ?

Thanks so much

[Leo Laohoo]

Should I using software "SWLAP1600-MESH-K9" or "SWAP1600-RCOVRY-K9" to compatible with WLC 5508?

Use "SWAP1600-RCOVRY-K9".

[tryeng001]

i have this problem too please help to answer on this soon, thank.

[Leo Laohoo]

i have this problem too please help to answer on this soon, thank.

You need to tell us what the problem is.  We can't read your mind.

[Abhishek Abhishek]

SWAP1600-RCOVRY-K9  IOS Wireless LAN Recovery-should be used for Controller based deployment

AND

SWLAP1600-MESH-K9  Enterprise Wireless Mesh - AP1600I Controller-based SW Image-used for Wireless MESH deployments only