Access point seamless access

[anil.sanap]

Hi,

we had configured the controller 2504 and AP

AP joini the controller as expected, but somehow user when move from one accesspoint to other they are facing issue

like getting weaker signal, not getting the signal from nearer AP.

do let us know how to resolve the issue.                  

[Daniel McDavid]

What code are you running? What model APs? Do you have 'Client Load Balancing' enabled under WLANS > WLAN ID > Advanced?

[Scott Fella]

It would be bests if you posted your show run-config and also tell us which WLAN is the issue.

Sent from Cisco Technical Support iPhone App

[Saurav Lodh]

Please check the Minimum RSSI, Hysteresis, Scan Threshold parameters from below configurations

http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/consolidated/b_cg74_CONSOLIDATED_chapter_01100.html#ID2694

[Leo Laohoo]

move from one accesspoint to other they are facing issue ike getting weaker signal, not getting the signal from nearer AP.

The wireless clients decide which AP to join.  It's got nothing to do with the WLC and/or the AP.

Upgrade the wireless NIC drivers.