cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
854
Views
0
Helpful
2
Replies

access point with adsl modem

haykooool
Level 1
Level 1

how can i config my access point connected in adsl modem

2 Replies 2

thomas.chen
Level 6
Level 6

You can set up each radio in the access point for different functionality. Considering the scenario, this can be done by setting up the SSID for the G radio and another SSID for the A radio. Then, set the role in the radio network parameter for the G radio to access point and for the A radio to the root bridge role.

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a0080606d4a.html

Naveen Kumar
Level 4
Level 4

Please try the steps:

1.Mention WIFI router model/make.

2..See "Announcement: on top.

3.....Click it.

4......Select "Broadband How to >>>"

5........see the threads for your use. ( manuals by @just4kix)

6.........It is immaterial which ADSl modem is used

7...........with any WIFI router. ( mostly all similar)

Para two:

8............. Ensure DHCP enabled in modem MT880

.................In TCP/IP Properties select "obtain IP address ...................automatically"

9.,,,,,,,,,,,,,,,,,, Test with LAN! to computer ethernet port.

10....................Try unsecured WIFI

11......................Then enter security key. 1.Mention WIFI router model/make.
2..See "Announcement: on top.
3.....Click it.

4......Select "Broadband How to >>>"
5........see the threads for your use. ( manuals by @just4kix)
6.........It is immaterial which ADSl modem is used
7...........with any WIFI router. ( mostly all similar)

Para two:
8............. Ensure DHCP enabled in modem MT880
.................In TCP/IP Properties select "obtain IP address ...................automatically"
9.,,,,,,,,,,,,,,,,,, Test with LAN! to computer ethernet port.
10....................Try unsecured WIFI
11......................Then enter security key.

Review Cisco Networking for a $25 gift card