08-01-2021 11:12 PM
Hi Experts,
I'm getting multiple alerts from Prime regarding the issues in Access points. below is the log message.
''Message: Access point 'XXXXXX' associated with controller 'XXXXX' draws low power from Ethernet. Failure reason: 'The AP draws 15.4 watts from Ethernet'. (6 times)''
The access points are working before without any issue, this issue is started recently.
Please provide any solution to this.
Thanks in Advance!
08-02-2021 12:14 AM
- Could be a controller-bug, for that check if the message is duplicated in the controller-logs (too).
M.
08-02-2021 12:51 AM
Is this error message coming out of Cisco Prime Infrastructure?
08-02-2021 12:54 AM
Yes, this is the email alert from Cisco Prime.
08-02-2021 01:03 AM
@VineeshVijayan wrote:
Yes, this is the email alert from Cisco Prime.
I recommend ignoring this alarm.
08-02-2021 01:06 AM
Could you please explain why?
08-02-2021 01:34 AM
Bug with PI.
08-02-2021 03:41 AM
What is the AP model and what POE standards does the switch support?
08-03-2021 10:35 PM
Hi Arshadsaf,
Please note the power inline command output below.
Interface Admin Oper Power Device Class Max |
Gi0/4 auto on 16.8 AIR-CAP3702E-E-K9 4 30.0 |
08-04-2021 09:00 AM
since your switch is POE+ capable, pls check your switch POE budget and it's consumption. If they are within limits then you may ignore this error messages.
Only time I have seen this messages were when a 3700 connected to a 3560 switch which was only delivering af.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide