adding a 1600 AP to existing 1200 AP network

[jennifermorrison]

Hello I have a Airnet 1600 Series that I want to add as another repeater to our 1200 series 802.11g network. We already

have 2 AP's running fine as Repeater and BR, I just need to a this 1600 AP to the existing wirelss. Everytime I try to change the

1600ap as a repeater, I get the below error.

cannot set role in radio network to when another radio is set to one of the above roles

[Scott Fella]

Well since your other APs are only 2.4ghz, you can leave the 5ghz radio set as root and change the 2.4ghz to repeater. That should work. If not, can you post your show run config and a screen shot of the error.

Sent from Cisco Technical Support iPhone App