Hi Leo:
These are the outputs from Controller:
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.2.130.0
RTOS Version..................................... 8.2.130.0
Bootloader Version............................... 8.1.102.0
Emergency Image Version.......................... 8.1.102.0
Build Type....................................... DATA + WPS
System Name...................................... COL_WLC_TENJO
System Location.................................. Tenjo
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.2170
Redundancy Mode.................................. SSO
IP Address....................................... 192.168.80.34
IPv6 Address..................................... ::
System Up Time................................... 24 days 17 hrs 32 mins 34 secs
System Timezone Location......................... (GMT -5:00) Eastern Time (US and Canada)
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... CO - Colombia
Operating Environment............................ Commercial (10 to 35 C)
Internal Temp Alarm Limits....................... 10 to 38 C
Internal Temperature............................. +20 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 9
Number of Active Clients......................... 126
Burned-in MAC Address............................ 00:A6:CA:F0:AF:D9
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, Off
Maximum number of APs supported.................. 1500
System Nas-Id.................................... COL_WLC_TENJO
WLC MIC Certificate Types........................ SHA1/SHA2
Licensing Type................................... RTU
(Cisco Controller) >
(Cisco Controller) >show time
Time............................................. Thu Jun 1 07:51:33 2017
Timezone delta................................... 0:0
Timezone location................................ (GMT -5:00) Eastern Time (US and Canada)
NTP Servers
NTP Polling Interval......................... 600
Index NTP Key Index NTP Server Status NTP Msg Auth Status
------- ----------------------------------------------------------------------------------------------
(Cisco Controller) >
And these are the outputs from AP:
LWAPP Static IP Configuration
IP Address 192.168.80.181
IP netmask 255.255.255.0
Default Gateway 192.168.80.1
Primary Controller 192.168.80.34
Cisco IOS Software, C1260 Software (AP3G1-K9W8-M), Version 15.3(3)JA8, RELEASE SOFTWARE (fc1)
Technical Support:
http://www.cisco.com/techsupportCopyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Fri 22-Apr-16 05:28 by prod_rel_team
As you can see, I can't get the complete outputs fro AP because is on production right now.
Nestor Gomez