09-22-2013 03:23 AM - edited 07-04-2021 12:54 AM
Can I add a custome based antenna in WCS for coverage prediction?
09-22-2013 06:03 AM
What do you mean? The antennas you can choose are only Cisco branded antennas. If they are different manufacture, it will not be in the list. You can try to choose something similar and also set the dbi for the antenna.
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0maps.html#wp1126390
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0apcfg.html#wp1095547
Sent from Cisco Technical Support iPhone App
09-24-2013 01:58 PM
Depending on the version of your WCS ...
Go to Configure > Access Point > choose the AP of your choice > under Radio Interface choose 802.11a/n > under Antenna is External Antenna drop down box.
09-25-2013 05:46 AM
WCS provides the ability to enable or disable the use of specific antennas. All antennas are enabled by default. At least one transmitting and one receiving antenna must be enabled. You cannot disable all transmitting or all receiving antennas at once.
Pease check the below links which may be helpful for you:
Link-1
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0apcfg.html#wp1095504
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide