After upgraded WLC 5508 from 8.0.115 to 8.0.152, users unable to connect to Flexconnnect mode APs

[jay.leong3101]

Before WLC 5508 upgraded to 8.0.152, users able to connect to APs with Flexconnect mode. But after upgraded, there is no changes on Flexconnect configuration, all users unable to connect to the APs with Flexconnect mode. Who has the experience and solutions, please advise. Thank you.

[Flavio Miranda]

Hi,

  Your assumption may not be correct. Try to run "debug client 'mac address'" and share the result here.

Also, provide information on which authentication method are you using.

-If I helped you somehow, please, rate it as useful.-