12-09-2013 11:21 PM - edited 07-04-2021 01:23 AM
Hi,guys
Recently, I'm going to install AIR-ANT2440NV-R antenna for AIR-CAP3502E-C-K9. The Cisco document for AIR-ANT2440NV-R says it can be installed outdoor. But I'm worried about the line conneted between the antenna and the AP. Does it need to be protected from the complex outdoor environment?
Solved! Go to Solution.
12-10-2013 04:39 AM
That can be used outdoors. You just need to follow some basic steps when installing antennas outside.
You need coax seal to cover any openings and connectors, make sure you have a drip loop and make sure you mount the antenna the correct way, cable on the bottom.
I have used these and others outdoors, but I also have installed a lightning arrestor in each antenna lead prior to connecting to the AP just for protection.
Sent from Cisco Technical Support iPhone App
12-10-2013 04:39 AM
That can be used outdoors. You just need to follow some basic steps when installing antennas outside.
You need coax seal to cover any openings and connectors, make sure you have a drip loop and make sure you mount the antenna the correct way, cable on the bottom.
I have used these and others outdoors, but I also have installed a lightning arrestor in each antenna lead prior to connecting to the AP just for protection.
Sent from Cisco Technical Support iPhone App
12-11-2013 02:53 AM
Many thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide