air-ap1141n-e configuration

[MIkel Echezarreta]

HI

We have bought an air-ap1141n-e to change another cisco AP.

I really dont know how to start configuration, I just need the AP to be connected to my network

switch so the people in the office have wireless as we have before the otrh AP crashes,

Thanks  

[Ashish Chandra]

Hi Mikel,

As i see from the AP name it appears to be an autonomous AP.

Check this link on how to configure the same.

https://supportforums.cisco.com/docs/DOC-16087

Thanks

Ashish.

[Scott Fella]

You can find other guides that can help you here:

http://www.cisco.com/c/en/us/support/wireless/aironet-1140-series/products-configuration-examples-list.html

http://www.cisco.com/c/en/us/support/wireless/aironet-1100-series/products-configuration-examples-list.html

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

[manassin]

Hi Mlkel,

You want to use this AP as standalone ar as LWAP.

Do we have WLCs as well.

* If we have WLCs as well then this AP needs to be converted to LWAP as this is a Standalone AP. (Please share the show version from the AP console so that we can confirm if this AP has Standalone or LWAP image)

* If we do not have WLCs then we would have to configure this AP as a Standalone AP.

So our first step would be to know the configuration requirement-- would it be a LWAP or Standalone AP then only we can make further action plan.

Thanks and regards,

Manas Pratap Singh.

[MIkel Echezarreta]

Hi

Im just taking this problem again to try and solve it. I have my cisco AP withouth using for a year because of the difficulties to configure it, it is just for experts.

Well I really dont know if its on LWAP or standalone mode.

I have try to connect to it by console mode but do not have any answer.

What i need is to configure it on DHCP mode to get the IP address from my DHCP server and give wifi signal to my office, thats all what I need.

I can give remote access to my notebook so you can give me some advices on how to start configuration.

Thanks