AIR-AP1242G-E-K9

[csco11030279]

weak signal, I donno how to imrove it is there any suggestion ???? pleaseeeeeeeeeeee

[Leo Laohoo]

Duplicate post. 

[csco11030279]

That one for 1242AG not 1242G;;;;    (((, my AP is 1242G , I increased the gain , I used as dummy suggestion 5GHs antenna, I have changed also the power transmition , relocation , I turnd off all AP arround this AP to remove any kind of interference , I forced the AP to use channel 1,3, and 11 , also to use channel 10 also the same, the area only around 10 meters.

I used deferent wireless clients BB, Windows, CUIC, IPhone, etc

[Stephen Rodriguez]

what antenna are you using?

Steve

[csco11030279]

for this AP two ports only for 2.4 ,

Dual RP-TNC antenna connectors for 2.4-GHz radios

but I dout in one thing , the2.4GHz  antenna for this AP similer to the 5GHz antennas for 1262 AP,, some thing strange

[Stephen Rodriguez]

what is the part number of the antenna.

[csco11030279]

Product/Model Number:	AIR-AP1242G-E-K9
Top Assembly Serial Number:	FCZ1416800X
System Software Filename:	c1240-k9w7-tar.124-3g.JA1
System Software Version:	12.4(3g)JA1
Bootloader Version:	12.4(13d)JA
System Uptime:	1 hour, 15 minutes

[Leo Laohoo]

Your photo looks kinda wierd.  Your product ID is a 1242 but the WAP has only TWO (2) radio antenna sockets instead of  FOUR (4).

[Stephen Rodriguez]

I need to know the part number of the antenna, we know the AP.

Steve

[Scott Fella]

Doesn't look like a 2.4ghz antenna if its a Cisco branded one.

[csco11030279]

how can get it ??

[Stephen Rodriguez]

it should have been on the packing the antenna came in.

[csco11030279]

I dont have it , it is an old setup ,

[Stephen Rodriguez]

than either your antenna went bad, which can happen.  Or it's a 5GHz antenna.

Do you have another 1242 you can take the 2.4GHz antenna off of and test?

Steve

[nikhilcherian]

can 1242 be G only ??