AIR-AP2802E-E-K9 uploading the software

[DanielTelnet]

I'm trying to upload new software to scces ponita. After running the update, an error appears.

ap-type mobility-express tftp://10.10.100.20/AIR-AP2800-K9-ME-8-10-190-0.tar

Image transfer complete.
Image downloaded, writing to flash...
do CHECK_ME, part1 is active part
upgrade.sh: Error: image not found.
+ do_upgrade CHECK_ME
+ [ ! -r /tmp/part.tar ]
+ loudlog Error: image not found.
+ logger -p 0 -t upgrade Error: image not found.
+ echo upgrade.sh: Error: image not found.
upgrade.sh: Error: image not found.
+ return 1
+ status=1
+ set +x
Error: Image update failed.

[Mark Elsen]

 - Could you check the tftp server's logs (too) , and check the transfer status of the intended image (e.g)

 M.

[Rich R]

What version of code is currently running on the AP? ("show ver")
ap-type with tar file is only used to convert from CAPWAP to ME, not upgrade.
Best to update to equivalent CAPWAP image before attempting conversion to ME 8.10.190.0.
https://software.cisco.com/download/home/286304498/type/286288051/release/15.3.3-JK10