AIR-CAP2702I in Autonomous mode

[alin aziz]

just recieved an 2700 access point how do i convert to Autonomous mode. 

i have looked at the software donwload for the 2600 and it list the Autonomous mode IOS but not for 2700 access point ? 

[Leo Laohoo]

Duplicate post. 

Go here:  https://supportforums.cisco.com/discussion/12279856/air-cap270i-k9-converting-autonomous-mode

[Prakash Parvathala]

You have to have the autonomous IOS file downloaded to the AP.

ap3g2-k9w7-tar.153-3.JAB.tar

is the file you need, you also need valid CCO Credentials to download the file.

As per below release notes 1700/2700/2600/3600/3700 all have same image starting with "ap3g2-xxx

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/ios/release/notes/rn-15-3-3.html#32237

Ap3g2

1700I, 2700I/2700E,2600I/2600E, 3600I/3600E, 3700I/3700E

[sobhardw]

Please refer to the below Community on conversion of lightweight mode to autonomous mode

https://supportforums.cisco.com/discussion/12336596/how-convert-ap-1700-2700-lightweight-mode-autonomous-mode