01-29-2013 01:22 PM - edited 07-03-2021 11:26 PM
Can i run both 2.4 and 5ghz at the same time? so my N user's can connect at 300Mpbs on the 5ghz bonded, and my G users can connect to 54Mbps?
Also i ask because of coverage, my 5ghz does not cover as far as the 2.4 so those at the extremity's could at least get G with a good signal
Thanks
01-29-2013 01:24 PM
you sure can!
just need to configure the SSID under both the radi0 and radio1 interfaces.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
01-29-2013 01:33 PM
The 5ghz being a higher frequency doesn't travel as far as the 2.4ghz. Like Steve mentioned you can run an SSID on both radios since you have a Lightweight Access Point. This does require a a WLC.
Sent from Cisco Technical Support iPhone App
01-29-2013 01:36 PM
or convert it to run aIOS
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
01-29-2013 04:13 PM
Here are the conversion links:
Using a TFTP Server to Return to a Previous Release
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide