Hi,
we habe a "funny" AIR-CAP3602I-E-K9 for which we need to read out the MAC via SNMP query.
This one and only specimen doesn't return it's MAC. Both ethernet MAC and Base Radio MAC are available In wism2.
Any suggestions on how to overcome the problem?
SW version:
Cisco IOS Software, C3600 Software (AP3G2-K9W8-M), Version 15.2(2)JB1, RELEASE SOFTWARE (fc1)
BOOTLDR: C3600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(23c)JY, RELEASE SOFTWARE (fc1)
cisco AIR-CAP3602I-E-K9 (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.
PowerPC CPU at 800Mhz, revision number 0x2151
LWAPP image version 7.4.100.60
SNMP Query: snmpwalk -v 2c -c <pswd> <wism-ip> 1.3.6.1.4.1.9.9.513.1.1.1.1.2
SNMP Reply:
...
iso.3.6.1.4.1.9.9.513.1.1.1.1.2.32.58.7.73.114.112 = Hex-STRING: 60 73 5C AA 09 D5
iso.3.6.1.4.1.9.9.513.1.1.1.1.2.80.6.4.111.202.32 = STRING: "LN5`SR" <----- this is the offender
iso.3.6.1.4.1.9.9.513.1.1.1.1.2.80.6.4.187.125.176 = Hex-STRING: 4C 4E 35 C7 1E 25
iso.3.6.1.4.1.9.9.513.1.1.1.1.2.88.151.30.178.178.128 = Hex-STRING: 6C 20 56 E6 9C B9
iso.3.6.1.4.1.9.9.513.1.1.1.1.2.88.191.234.1.112.192 = Hex-STRING: 58 BF EA 01 70 DC
...
Thanx in advance, KaTeRiNa