08-21-2014 08:09 AM - edited 07-05-2021 01:24 AM
Hello,
I have a 5508 WLC with the 7.6.120.0 Software Version. I connect some new, out-of-the-box AIR-CAP3702E-A-K9 AP's and they show:
CleanAir Admin Status = Enable
CleanAir Oper Status = DOWN
When I go to the "Wireless" Tab, then to "Radios" on the menu and select "Configure" on the AP, CleanAir Admin Status is on "Enable."
Does this mean that the AP is doing the CleanAir?
Thank you in advance.
Solved! Go to Solution.
08-21-2014 08:13 AM
No the AP is not doing Clean Air if the Oper Status is down.
Go to the main 802.11b/g/n and a/n/ac tab and make sure that Clean Air is enabled globally:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70cleanair.html#wp1162863
HTH,
Steve
08-21-2014 08:13 AM
No the AP is not doing Clean Air if the Oper Status is down.
Go to the main 802.11b/g/n and a/n/ac tab and make sure that Clean Air is enabled globally:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70cleanair.html#wp1162863
HTH,
Steve
08-21-2014 09:58 AM
It worked. Thank you very much!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide