AIR-CAP3702I with WLC8510 on Cisco Prime Infrastructure

[rschmidli]

Cisco Prime can not display Accesspoint Air-Cap3702I. Audit State ist Mismatch "In Downloading State". On WLC 8510, AIR-Cap 3702I works fine.

CPI 2.0 with Update 4.0 Device Pack

WLC 8510 7.6.110.0

What can i do ?

[tedmonson-hhsc]

I don't think that Prime NCS 2.0 supports the 3702i AP as of yet ..

[jucape2009]

hi,

you need CPI 2.1 in order to support 3702 ap.

Regards

[Saurav Lodh]

Please check the Access point IOS release

Refer http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

for compatiblity

[mohanak]

Please check the compatibility of wlc with prime 2.0:

Cisco Prime Infrastructure	Cisco WLC	Cisco MSE	ISE	Remarks

2.0

7.5.102.0* 7.4.121.0 7.4.110.0 7.4.100.60 7.4.100.0 7.3.112.0 7.3.101.0 7.2.115.2 7.2.111.3 7.2.110.0 7.2.103.0 7.0.250.0 7.0.240.0 7.0.235.3 7.0.235.0 7.0.230.0 7.1.91.0 7.0.220.0 7.0.116.0 7.0.98.218 7.0.98.0

7.5.102.101** 7.4.121.0 7.4.110.0 7.4.100.0 7.3.101.0 7.2.110.0 7.2.103.0 7.0.240.0 7.0.230.0 7.0.220.0 7.0.201.204 7.0.112.0 7.0.105.0

1.0 1.1 1.2

* Cisco Prime Infrastructure 2.0 enables you to manage Cisco WLC 7.5.102.0 with the features of Cisco WLC 7.4.121.0 and earlier releases. Prime Infrastructure 2.0 does not support any features that are introduced in Cisco WLC 7.5.102.0 or later releases including the new access point platforms. ** Cisco Prime Infrastructure 2.0 enables you to manage 7.5.102.101 or later releases of Cisco MSE with features of Cisco MSE Release 7.4.121.0 and earlier releases. Prime Infrastructure 2.0 does not support any features that are introduced in Cisco MSE 7.5.102.101 or later releases. For information on MSE model and platform details, see Table 6 .

[julio.vergara]

Do you have any answer for the case?

I have yhe same problem