05-07-2014 03:09 PM - edited 07-05-2021 12:47 AM
HEllo
i am trying to setup ISE 1.2 to be radius authentication server for our WLC admins; we have thsi setup for older WLCs no problem but with this new WLC it just not working. Any good document i can follw to setup admin access via radius ISE 1.2?
thanks
05-11-2014 02:37 AM
Hi
If you are trying to control GUI access of these controller (https://x.x.x.x/wireless) via RADIUS, I do not think you can do this.
Since those are IOS based devices, you can restrict CLI access using privilege levels, but not WLC GUI access using RADIUS attributes.
HTH
Rasika
**** Pls rate all useful responses. Each time you rate a response Cisco will donate $1 to Kiva ****
05-12-2014 08:47 AM
Hi Rasika
if this is a IOS device then i should at least be able to use AAA commands to restrict/provide access to admin users - right now if i ssh into cli i can type anything as un/pw (like afdfdsfsdf/fdfdfasd) and i got in into enable mode.
I have routers/switches/asa i configured for AAA no problem. Is behavior of this CT5760 as same as with other Cisco ios devices?
05-14-2014 08:08 AM
Hi
Any ideas?
Thanks
05-28-2014 03:57 PM
Please refer to the link-
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_admin.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide