cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
639
Views
0
Helpful
4
Replies

AIR-CT5760 and ISE as admin authentication server

endpoint
Level 1
Level 1

HEllo

i am trying to setup ISE 1.2 to be radius authentication server for our WLC admins; we have thsi setup for older WLCs no problem but with this new WLC it just not working. Any good document i can follw to setup admin access via radius ISE 1.2?

 

thanks

 

 

4 Replies 4

Hi 

If you are trying to control GUI access of these controller (https://x.x.x.x/wireless) via RADIUS, I do not think you can do this.

Since those are IOS based devices, you can restrict CLI access using privilege levels, but not WLC GUI access using RADIUS attributes.

 

HTH

Rasika

**** Pls rate all useful responses. Each time you rate a response Cisco will donate $1 to Kiva ****

Hi Rasika

if this is a IOS device then i should at least be able to use AAA commands to restrict/provide access to admin users - right now if i ssh into cli i can type anything as un/pw (like afdfdsfsdf/fdfdfasd) and i got in into enable mode.

I have routers/switches/asa i configured for AAA no problem. Is behavior of this CT5760 as same as with other Cisco ios devices?

 

Hi 

Any ideas?

 

Thanks

 

 

Abhishek Abhishek
Cisco Employee
Cisco Employee

Please refer to the link-

http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_admin.html

Review Cisco Networking for a $25 gift card