06-23-2015 02:59 AM - edited 07-05-2021 03:27 AM
Hello
We have AIR-CT7510-K9 supporting 500 AP. As per datasheet it has 2X10Gig port however we have only 1Gig switch port on switch.
Please advise solution for physical connectivity for WLC & switch with 1Gig access?
Solved! Go to Solution.
06-23-2015 03:02 PM
Not possible. Only SFP-10G-SR or SFP-10G-LR allowed. There is no such thing as a Cisco SFP+ copper module.
06-23-2015 03:10 AM
I believe 7510 only supports SFP+.
06-23-2015 08:15 AM
Hi Leo
WLC is 10gig sfp capable however I need understanding on physical connectivity ..is this possible to have gig rj45 other side?
06-23-2015 03:02 PM
Not possible. Only SFP-10G-SR or SFP-10G-LR allowed. There is no such thing as a Cisco SFP+ copper module.
06-23-2015 09:00 AM
as per link below, the switchport should be 10 gig and same SFP+ :
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/Flex_7500_DG.html
"
• LAG support for 2x10G interfaces allows active-active link operation with fast failover link redundancy. An additional active 10G link with LAG does not change the controller wireless throughput.
"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide