Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
looking for supported access points and its IOS version latest release with the WLC 8.2.0
Hi All, Have just made some changes to a network to add 2 SSIDs to give basically guest and office access over the Aironets. Equipment in network is: Cisco ASA 5510 Cisco 3750 Switch Aironet 1231G K9 x 2 basic config is VLAN 1, VLAN 10 and VLAN 20...
can someone help me secure the power level setting in WLC to mW equivalent table? i have read this but forgot where, please help
These APs support dual band wireless N. However no option through the GUI seems to enable this functionality as all of the clients negotiate a speed of 54 mbit. There seems to be no other options for speed except for 54mbit and lower. It would seem ...
Hi, I have a WLC running 8.1.121.0. We have a strange problem that occurs from time to time. Sometimes, when people connect to the wifi using their windows laptop, the connection works but with a yellow exclamation mark on their wireless icon in sys...
Resolved! two factor authentication ISE.
Radius is not an option then what is the best options for two factor authentication methods? any configuration steps or links. please help me
Resolved! Planning a new outdoor wireless mesh
I have a new project to create an outdoor wifi mesh to connect several buildings that cannot be connected via fiber. This is for an industrial area where there are a lot of power lines, thick concrete and metal structures, etc. The distances f...
I like to know if you can configure the following setup. 1 Primary unit with 2 HA-SKU backup. We have one Primary Base unit with a HA-SKU in 1 datacenter and one HA-SKU in another datacenter. Can this layout work if so, how would you configure it? T...
I can see that there isn't any good description for this so does any have experience in settings this parameter.My problem is that user need to reauthenticate after timeout.Clients want to be on full time on smart phones an IPADs even that the don't ...
Hello, I work for a company that recently purchased Cisco antennas(AIR-ANT2544V4M-R) unfortunately the lead cables are not long enough. I see that Cisco has a 5ft low losss cable jumper(AIR-CAB005LL-R) and I believe that this will work but I can'...
Hi I have a 5508 WLC connected to a 4507 SUP 6-E on 4 ports configured into a port channel. Everything works fine. However if I then enable the extra 4 ports on the 5508 into the same port-channel on the same 4507 I start to see Giants appear on th...
Resolved! 5GHz bonded channels question
I have a (hopefully) quick question about 40Mhz wide channels with the 5GHz spectrum. If I am using 40Mhz wide channels in my wireless network and I disable channel 149, does that mean channel 153 will not be used even if it's still enabled? From w...
Hi, I have a AIR-WLC4402-50-K9, which doesn't have support, but it's still working,, manufactured on 2008, most of my APs are 2011. recently i read about the bug and field notice: https://tools.cisco.com/bugsearch/bug/CSCuq19142/?referring_site=bugqu...
Hello, I am testing L2 roaming on an open SSID between 3650 (MA) and 2 x 5508 in SSO (MC). The output of the show wireless mobility summary on the 3650 is : 3650-ERM-LT1#show wireless mobility summaryMobility Agent Summary:Mobility Role ...
I'm fairly green with switches...I'm having issues adding a 3702i wireless device on wireless lan controller. Please assist
