06-17-2004 10:46 AM - edited 07-04-2021 09:43 AM
Hi,
I am trying to setup two VLANs from the Aironet 1100 AP to the Baystack 420 switch. One VLAN will take domains users and the other will take guests. Authentication is taking place with a Radius server and everything works great until I configure the AP to VLANs will all of a sudden nothing works anymore. Everything is running the latest firmware.
Each VLAN on the AP is associated with its own SSID. Please don't send me to the www.tek-tips.com website, that solution doesn't seem work for me.
Any ideas would be great?
Thanks in advance.
06-23-2004 01:56 PM
06-24-2004 01:44 AM
Did you configure trunk on the switch side (on port to which AP is connected)?
Good Luck,
Srdja
06-24-2004 11:00 AM
Yes, the trunk was configured on the switch side. I tried it with filtered and unfiltered packets. Thanks again.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide