I am trying to configure 2 new 1131AG's in the same manner as I have a bunch of 1200's configured for WPA-PSK, TKIP and open authentication using a local mac address list.
The AP's are configured with a default native VLAN 1 for management and a VLAN 33 that had the SSID assigned to it on the 802.11g radio. the 802.11a radio is in shutdown mode. My problem is this:
In the SSID manager I have assigned my only ssid to radio0 the 802.11g radio and VLAN33. Under Client Authentication I have selected Open with MAC Authentication. with the Key management set to Maddatory WPA, the AP will not keep the pre-shared key I enter. If I set the client authentication simply to open the key stays in place just fine.
This set up worked great on all of the 1200 seriers AP's I have deployed, why the difficulty with the 1131AG's ?
