Wireless

We have a Cisco 871 router at our remote work at home individuals 3 in total. All these locations have standard site to site IPSEC VPN's back to a Cisco PIX 506E 6.35. Each remote has their own 7960 Cisco Phone which registers with a Call Manager a...

Long story short, is there a wireless bridge product that can directly replace the old BR-350 workgroup bridge product? I was told that the 1300 and 1400 could not directly replace our 350s because the external TNC connectors for the antenna's were d...

Hi,I need some information about Wireless deployement in a huge surface.I want to cover a surface of 40 ha that contains about 400 appartements and Villas.Is there a solution to do that with a few number of Access Points?Thanks

We are trying to migrate several hundred symbol wireless scanners from a Symbol AP system to our managed Cisco network. The scanners do NOT use any bandwidth while not in use to conserve battery, ergo when the session timeout is reached they are dis...

I have a Cisco 2100 series WLC and 3 Cisco 1131AG AP's. I'm trying to get 108Mbps by enabling both 802.11a & 802.11g networks on the controller. My laptop is set for 802.11a&g but I'm still only getting 54Mbps. What am I missing?

Hi,From reading previous posts I have come to the conclusion that mounting 1131APs to the ceiling is the best/preferred option, but what if your ceiling is about 8-9meters high.I have read that this unit should not be mounted higher than 15feet(4.5me...

is it possible to convert Aironet 1020 AP from LWAP to Autonomous to deploy without a Controller?

I have some problems with a aironet 1130ag access point. it lost signal strength over the period of a week so i did a factory reset on it. now, after setting it back up (very basic) i can't connect to it at all. can't descover it or connect. it has a...

I recently deployed a cisco 1300 airnet ap/bridge to slove a conectivity problem with are companys laptop users in a remote bldg approx 410feet from the main bldg,i first used the 1300 with the intergrated 13dbi antenna,(poor /weak signial)so i then...

Can I setup my 1130AG to run as a trunk port and then run various vlans on it and when user authenticate via AES it puts the user a certain vlan base on their credential without having wireless controller. Or is there methods of completing this deplo...

Hi all,I'm not familiar with Cisco new AP and have a question for all. Is it possible to have one access point authenticate domain users on one vlan and then outside users on another vlan without authentication? For example, if i am as a domain user...

PDA'User's are not able to connect to AP while using TKIP encryption. Where as laptops are able to connect to AP. Kindly let me know if there is some configurtion that i need to look on. Any suggestions on this would be appricaited

HiI'm pretty sure that I found instructions here for upgrading an AP to an LAP without using the upgrade tool that Cisco provides - I ended up using this technique when the toll didn't work for me. Can anyone help me find the details?Thanks

hi, I have problem with access point air-lap1242ag-a-k9 work with lan controller air-wlc2106-k9. the connection works well during a time but soon it is lost during few minutes and soon it raises automatic, this process repeats the day throughout. I h...