08-21-2008 02:05 PM - edited 07-03-2021 04:22 PM
Hi,
First are they togther a good combination?
I'm going to buy new ap 1252 and catalyst switch 2960-8TC-L my question can I connect the ap to port 1x10/100/1000Base-T/SFP (mini-GBIC)(uplink)?
because to work on ap with full capacity 300 mbps it needs 1000 port, for powering ap I'll use powerinjector .
this will sereve 15 pc as a workgroup and 60 clients on wlan.
Regards
saher
Solved! Go to Solution.
08-22-2008 04:50 AM
Depending on what kind of traffic and bandwidth requirements the clients require, you might need a couple more ap's which means you might have to settle for a 24 port switch. Cisco recommends 15 - 25 users per so, but again, you can have more if it's just email and web browsing.
08-22-2008 04:50 AM
Depending on what kind of traffic and bandwidth requirements the clients require, you might need a couple more ap's which means you might have to settle for a 24 port switch. Cisco recommends 15 - 25 users per so, but again, you can have more if it's just email and web browsing.
08-22-2008 01:30 PM
thanks fella5, yes it's just for email and web browsing only,please still need a clear answer for my question can I connect the ap to that port 1x10/100/1000Base-T/SFP (mini-GBIC)(uplink), as a vlans trunk port ?
regards
saher
08-22-2008 04:42 PM
Yes you can.
08-22-2008 09:04 PM
Thank you again you always help.
BR
saher
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide