09-16-2013 08:35 AM - edited 07-04-2021 12:51 AM
Hi
Having an issue with the new Aironet 1252AG we have installed. The network has a Windows 2012 server for the domain controller and DNS/DHCP. This is connected to a Linksys SRW2048 gigabit switch which also has the ADSL modem and Aironet connected to it. We have configured it to the point of where Windows laptops and a Samsung TV have a stable wireless connection with internet access but are having issues with all Android phones whereby they connect and authenticate to the AP, are able to access the local network but have troubles with the internet. There are no error messages in the event log. Loading the first web page after connecting is fine but all subsequent web pages fail to load and time out. I'll paste the configuration below but would greatly appreciate any help that can be given.
Kind Regards
Tyson Kedgley
------------------ show running-config ------------------
Building configuration...
Current configuration : 2354 bytes
!
! Last configuration change at 10:32:41 AEST Mon Mar 1 1993 by Cisco
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname aironet
!
logging rate-limit console 9
enable secret 5 <removed>
!
no aaa new-model
clock timezone AEST 10 0
!
!
dot11 syslog
!
dot11 ssid aironet2.4
authentication open
authentication key-management wpa version 2
guest-mode
wpa-psk ascii 7 045002120420581F50415C
!
dot11 ssid aironet5
authentication open
authentication key-management wpa version 2
guest-mode
mbssid guest-mode
wpa-psk ascii 7 1045000D0E16065A555C73
!
crypto pki token default removal timeout 0
!
!
username Cisco password 7 <removed>
!
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption mode ciphers aes-ccm
!
ssid aironet2.4
!
antenna gain 0
speed basic-1.0 basic-2.0 basic-5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
channel least-congested 2452 2457 2462
station-role root
no dot11 extension aironet
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
no ip address
no ip route-cache
!
encryption mode ciphers aes-ccm
!
ssid aironet5
!
antenna gain 3
no dfs band block
speed basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
power client 17
channel 5785
station-role root
no dot11 extension aironet
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
!
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
!
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
snmp-server community <removed> RO
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
transport input all
!
end
09-16-2013 10:08 PM
Hi
Have been able to resolve the issue. The TPLINK ADSL2 modem was the culprit. This in association with the aironet and Android phone were somehow incompatible but now with a Linksys modem all is well again.
Cheers
Tyson
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide