Aironet 1600 series access point reject any wifi connection

[kimi lam]

I have an Aironet 1602i Access Point , I reset it to factory default and configured WIFI.

After setup, I can see SSID but I cant connect to the Access Point.

I tried remove security password, but still cannot make any WIFI connections to the Access Point.

May I please know if i have done the wrong settings?

THANK YOU SO MUCH FOR EVERYONE'S KIND ASSISTANCE

[Rasika Nayanajith]

Pls post your config to see what's the issue

HTH

Rasika

[kimi lam]

Please see below reply my Cisco Aironet 1602 settings

Thank you!!

[Sandeep Choudhary · Accepted solution]

can you past ethe complete config from AP CLI?

Regards

Dont forget to rate helpful posts

[Sandeep Choudhary · Accepted solution]

paste the complete config via Command line!!!!!!

[kimi lam]

Thank you so much for your help!

MUST RATE!!

[kimi lam]

[patoberli]

Thanks, one suggestion for the next time, mark all the text in putty and paste it here, instead of screenshots ;)
Regarding your wireless issue:
1. Don't use WEP! Only WPA2 with AES, not TKIP.
2. Don't use VLAN1 if possible
See here for some configuration examples:
https://supportforums.cisco.com/t5/wireless-mobility-documents/autonomous-ap-and-bridge-basic-configuration-template/ta-p/3112198
Make sure you have also configured the switch correctly (if using a different VLAN than 1).
Here for much more details: https://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap4-first.html

[kimi lam]

SURE!!!