05-03-2018 02:24 AM - edited 07-05-2021 08:35 AM
We purchased a AP model 1832i (AIR-AP1832I-E-K9)
Mac: 501CB0B64410
Serial: KWC22090BOI
This device has no default IP address and it doesn’t broadcast the SSID to be configured.
05-03-2018 02:56 AM - edited 05-03-2018 02:57 AM
Hi,
Connect with console and chekc which image type it has!!
either lightweight or mobility express!!!
If it has Lightweigt then you need WLC to make it work else you need to convert it to mobility express.
How to convert:
Regards
Dont forget to arte helpful posts
05-03-2018 03:06 AM
05-03-2018 03:49 AM
run the command "show version" and paste the output here.
Regards
Dont forget to rate helpful posts
05-03-2018 04:22 AM
05-03-2018 09:48 PM
05-03-2018 10:18 PM
Hi,
1. download mobility express image
2. then use these post to convert it to mobility express:
https://www.semfionetworks.com/blog/convert-a-cisco-capwap-ap-to-a-mobility-express-ap
Regards
Dont forget to rate helpful posts
05-03-2018 10:34 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide