Aironet 1832i

[sam.m@itoffice.co.ug]

We purchased a AP model 1832i (AIR-AP1832I-E-K9)

Mac: 501CB0B64410

Serial: KWC22090BOI

This device has no default IP address and it doesn’t broadcast the SSID to be configured.

[Sandeep Choudhary]

Hi,

Connect with console and chekc which image type it has!!

either lightweight or mobility express!!!

If it has Lightweigt then you need WLC to make it work else you need to convert it to mobility express.

How to convert:

https://wifiburns.wordpress.com/2017/06/17/cisco-3802i-cawap-ap-conversion-to-mobility-express-access-point/

Regards

Dont forget to arte helpful posts

[sam.m@itoffice.co.ug]

Hey Sandeep,



When I got through console, who do I access the image type?

[Sandeep Choudhary]

run the command "show version" and paste the output here.

Regards

Dont forget to rate helpful posts

[sam.m@itoffice.co.ug]

Do i use command prompt. Plus i have a converter to usb i dont have a direct serial enabled machine..

[sam.m@itoffice.co.ug]

cisco AIR-AP1832I-E-K9 ARMv7 Processor rev 0 (v7l) with 966404/770088K bytes of memory.

Processor board ID KWC22090BOI

AP Running Image : 8.2.151.0

Primary Boot Image : 8.2.151.0

Backup Boot Image : 0.0.0.0

1 Gigabit Ethernet interfaces

2 802.11 Radios

Radio FW version : ee27b5094d5b8602d2d973ea084d5cf4

NSS FW version : NSS.AK.1.0.c10-00017-E_custC-1.67978.1



Base ethernet MAC Address : 50:1C:B0:B6:44:10

Part Number : 0-0000-00

PCA Assembly Number : 074-104694-02

PCA Revision Number : 01

PCB Serial Number : KWC22090BOI

Top Assembly Part Number : 074-104694-02

Top Assembly Serial Number : KWC22090BOI

Top Revision Number : A0

Product/Model Number : AIR-AP1832I-E-K9





I need to get mobility express image

[Sandeep Choudhary]

Hi,

1. download mobility express image

2. then use these post to convert it to mobility express:

https://www.semfionetworks.com/blog/convert-a-cisco-capwap-ap-to-a-mobility-express-ap

https://wifiburns.wordpress.com/2017/06/17/cisco-3802i-cawap-ap-conversion-to-mobility-express-access-point/

Regards

Dont forget to rate helpful posts

[sam.m@itoffice.co.ug]

[cid:image001.png@01D3E382.A55103C0]