Aironet 350 up to 100 mW??

admin_2 · ‎03-13-2003

In many documents it's reported that Aironet 350 AP and client adapter can reach 100 mW as transmit power but my aironet APs and clients (both with diversity antennas) let me select 50 mW as maximum power. Is it normal? There is something i can do to reach 100 mW and increase the coverage for each cell?

Everything, software and firmware are updated to the very last releases.

Thank You.

tepatel · ‎03-13-2003

Maximum power setting will vary according to individual country regulations.

Need to know that do you have a setting for 100mw under tx power or not.

Along with that need to know the part number of AP that you got which you can find on the bottom of AP. Make sure you have AIR-AP352E2R-A-K9.

Where A stands for America which will allow 100mw tx power.

mtratz · ‎03-25-2003

Is there a possibility to change the country-setting of the card?

derwin · ‎03-26-2003

No this is fixed and can only be changed in the factory.

If you have purchased this in a country that does not have the power restrictions then you should take them back to the place you bought them

If your company has moved them between countries then there is no way that this can be changed.

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350scg/ap350axc.htm

This link will help you see what power and channels should be for each country

m.delgadoperez · ‎04-01-2003

But?..what happend if a buy 25 cards for mexico and that have 50mW. Next I buy 30 cards for mexico too and that cards have 100mw!! do you think that is an error?