cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
449
Views
0
Helpful
1
Replies

AP 1100 + encryption channel

ngr
Level 1
Level 1

Hello,

I have the following situation:

- Cisco AP1121G (with IOS 12.2(13)JA1) that connects in the wired side to a HP Procurve switch 2524.

- 3 VLANs: Management (20), Staff (100) and Guest (102)

- 1 PC connected to the wired network

- Wireless users that connect to the AP using one of two SSIDs: Staff (802.1x authentication) or Guest (Guest mode). Depending of SSID thye are mapped to the correpondent VLAN (Staff or Guest).

Problem:

If the wireless user connects to the Guest network (no encryption) can contact with the PC in wired network (VLAN Guest). They are in the same IP subnet.

If the wireless user connects to the Staff network (authentication EAP/TTLS and WEP encryption) can't contact with de PC in wired network (the VLAN of PC was changed to Staff). They are in the same IP subnet.

If I change the authentication mode of SSID Staff to open and no encryption all works ok, so the problem is when the channel is encrypted.

Anyone can help me to solve this?

I put in attach the AP running-config.

Thanks in advance,

Nuno.

1 Reply 1

ngr
Level 1
Level 1

The problem was on wireless card (Orinoco Silver), that only support 40-bit encryption... :(

Nuno.

Review Cisco Networking for a $25 gift card