ap 1815i

[Alex_rt]

Hello!

I have a problem with ap AIR-AP1815I-R-K9

i have 2 AP and they have same firmware

cisco AIR-AP1815I-R-K9 ARMv7 Processor rev 5 (v7l) with 1015824/668048K bytes of memory.
Processor board ID FGL2237B10G
AP Running Image : 8.8.120.0
Primary Boot Image : 8.8.120.0
Backup Boot Image : 8.8.120.0
Primary Boot Image Hash: 01baa4dc5e200f50c5100e422f1444f8b35b11c8f295de2a3567589a8e82ec003c898a3d75ba59c1422b2906dba55558893b53f48c52d7e9bd74be5a76f0e40d
Backup Boot Image Hash: be79185a2d07f0949829dda507086c83153e0d906c5edf625f73a44b4ab410793520044f7d77034478622700f4ce9d05e090b256b917a061553beedbf52ae9a3
AP Image type : MOBILITY EXPRESS IMAGE
AP Configuration : MOBILITY EXPRESS CAPABLE
1 Gigabit Ethernet interfaces
2 802.11 Radios
Radio FW version : 1fdd5a71aaea29d5ce69b095bba594c5
NSS FW version : not available

Base ethernet MAC Address : 00:EA:BD:DC:25:B0
Part Number : 0-0000-00
PCA Assembly Number : 074-105850-02
PCA Revision Number : 0
PCB Serial Number : FOC223384U3
Top Assembly Part Number : 074-105850-02
Top Assembly Serial Number : FGL2237B10G
Top Revision Number : A0
Product/Model Number : AIR-AP1815I-R-K9

One of them boot first and came the Primery Controller, i have access to it from web bowser , here it's ok.

When the second AP is up, as i understand, it should choose who will be a master , but the second AP don't  join to WLC.

All AP and WLC in the same VLAN, all devices  ping.

I have DNS and DHCP service for this vlan.

 Web Interface of WLC i don't see my second AP.

What should i do?

[Alex_rt]

here debag info from AP1 WLC , at this time i turn on AP2

AP2 ip:192.168.102.104

there is nothig about ap2

[patoberli]

Thanks, not much to see here, time to increase the debug output...
Can you also enable:
debug capwap info
debug capwap errors

If those two don't show more, then also please enable debug capwap details.
To disable debugging, enter debug disable-all.

One more thing, you have enabled Russia as the Country on the Master?

[Alex_rt]

You know i found out that i can see web intreface AP2 it's like (OfficeExtend Access Point)

but i can't login, when i try to push the buttom login , nothing happend

attch with info and err

[Alex_rt]

debug capwap details

[patoberli]

Thanks, is it possible that not all models run the same software?
Can you please show me a 'show version' from the AP1 and AP2?
They must run the same software release. If they are, maybe you have discovered a bug in 8.8.120.0, in that case please contact TAC to troubleshoot further.

[Alex_rt]

---

@patoberli wrote:
Thanks, is it possible that not all models run the same software?
Can you please show me a 'show version' from the AP1 and AP2?
They must run the same software release. If they are, maybe you have discovered a bug in 8.8.120.0, in that case please contact TAC to troubleshoot further.

---

Yes pls, they Have same ver

see attch

[patoberli]

No, you can leave all APs as Mobility Express.

[Alex_rt]

---

@patoberli wrote:
No, you can leave all APs as Mobility Express.

---

if i leave all AP, who will be a WLC?

[patoberli]

The first one that boots up will be the Master. Software looks also correct. I suggest you open a TAC, might be a bug.

[Alex_rt]

Unfortunately i don't have a smart net service contract.

Will they open TAC without it?

[patoberli]

You can try it through your dealer. Otherwise I suggest you get a SMARTNET, also that you can download software in the future, which isn't possible without.

[Alex_rt]

i changed firmware 8.8.120 to 8.8.111

and i have same problem

[patoberli]

Ok :( I'm sadly out of ideas and suggest you open a TAC. If they can solve it, please write the solution here.