02-03-2017 03:14 AM - edited 07-05-2021 06:29 AM
AP: CISCO AIR-CAP702i-A-K9
Running flash: ap1g1-rcvk9w8-mx.152-4.JA I have tried to install a new flash via TFTP but can't it still rejecting the image
WLC: 4124
I have been trying to make the AP work with the WLC:
the AP is not recognizing the WLC with DHCP, I tried to configure it manually adding the primary controller IP and Name in the AP but still nothing.
I know 700 series uses capwap and only works in layer 3.at the moment the WLC is controlling Aironet 1000 series AP's; so once I changed the WLC to transport LWAPP from layer 2 to layer 3 the old APs stop working.
Solved! Go to Solution.
02-03-2017 03:43 AM
updating the firmware will make the old APs 1020 stop working?
Correct.
The final software support for the 4400 is 7.0.X. So this means that the 4400 cannot support the AP702.
However, the AP702 can be run using Autonomous IOS.
02-03-2017 03:28 AM
What is the exact firmware version the WLC is running on, 3.2.193.5?
For the 700 to work, the WLC must be running a minimum of 7.5.102.0.
02-03-2017 03:31 AM
updating the firmware will make the old APs 1020 stop working?
02-03-2017 03:43 AM
updating the firmware will make the old APs 1020 stop working?
Correct.
The final software support for the 4400 is 7.0.X. So this means that the 4400 cannot support the AP702.
However, the AP702 can be run using Autonomous IOS.
02-03-2017 05:56 AM
I'm trying to get the Autonomous Image but the web is asking for a service contract :/ it's the first time I need one of those.
02-03-2017 03:07 PM
Just want to say "thanks" for taking the time to rate our posts. :)
02-03-2017 03:28 AM
Hi,
AIR-CAP702i-A-K9 : it require 7.5.102.0 SW version on WLC to join.
You need to upgrade it.
Check the compatibility matrix:
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
REgards
Dont forget to rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide