07-07-2021 09:34 AM
Hi,
I just want to verify why the below AP doesnt support flexconnect? I Have other AP's like that but it supports Flexconnect.
Product ID AIR-CAP2602E-T-K9Version ID V01Serial NumberEntity NameEntity DescriptionCertificate TypeFlexConnect Mode supported No
07-07-2021 02:04 PM
It supports Flex connect. Depending on the controller you may need to convert it to Flex connect as most of the AP's are in local mode by default.
07-07-2021 02:14 PM
unfortunately, there is no option for flex connect under the AP mode
07-07-2021 02:37 PM
Which controller this AP is reporting to and the code?
07-07-2021 03:21 PM
What firmware is the controller running on?
07-08-2021 09:10 AM
Like @Leo Laohoo and @farshad already asked and more:
What WLC?
What software version is the WLC running on?
What software is currently running on the AP? (hopefully not a recovery image for example)
What mode is the AP currently in? (for example bridge + flex is not supported on some APs/software versions)
07-09-2021 01:27 PM
its 7500 with 8.0.141 code.
current software on ap is 7.5
AP mode is currently on local mode
note: there is no option for flexconnect when you drag down from the "AP mode" button
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
