ap group

[chemban_2015]

Hi,

I want to achevie only particular ssid(test2 ) will broadcast only through group1 ( two ap's are added in the group) .
But what happened is test2 is broadcasting through all AP's regardless of the group

ssid : test1
default group
(100 ap is in the group)

ssid : test2
group1
(two ap's are added in the group).

Wireless controller is 5700 series 

Please help

Thanks

[Sandeep Choudhary]

default Group will brodacst all SSIDs.

dO THIS.

1. Create APG1 and assign all SSID except test2 then assign 100 APs to this group

2. Create APG2 and assign only test2 ssid then add your 2 APs.

***No AP should be present in default group other that will broadcast all WLANs.

Regards

Dont forget to rate helfpul posts