AP Groups - Guest Access - Anchor Controller

[mark.cronin]

Need clarification - I think it does work

Does the AP Group feature work with the anchor controller guest access feature

SSID guest --- LWAP -- LWAPP -- Foreign WLC --- EoIP --- Anchor Controller --- VLAN 10 or VLAN 11

ie

Guests in Building 1

SSID guest VLAN 10

Guests in Building 2

SSID guest VLAN 11

Mark

[jhedstr2]

Hi,

As far as I know, AP Group only works locally in each controller, and the mapping between SSID and VLAN is done in the anchor controller.

Therefore, all clients will end up in the same VLAN, even if access points are in different AP Groups in the first WLC.

Kind regards

Johan